2nd Gen Amplified Shark Fin Antenna | FM/AM Signal Booster for Car Radio

More Than Just a Styling Accessory

Is your favorite AM news station or FM rock channel drowning in static? Did your reception get worse after you tinted your windows? The factory antenna on your truck or sedan isn't just an eyesore; it's likely underperforming.

This is the 2nd Generation Amplified Shark Fin Antenna. It’s designed to replace those old, whippy masts or failing stock antennas. It combines a sleek, aerodynamic profile with a powerful, built-in signal amplifier to deliver crystal-clear AM/FM reception, no matter where the road takes you.

Why Upgrade? Key Benefits for U.S. Drivers

1. Next-Gen Amplification for Dead-Zone Proof Reception

Equipped with a 2nd Gen low-noise chipset, this antenna actively boosts weak signals. Whether you're cruising through the suburbs, driving in a concrete-heavy city, or heading out on a cross-country road trip through rural areas, this booster dramatically reduces static, hiss, and popping sounds. It keeps your news, traffic updates, and music loud and clear.

2. Built-In Amplifier: Say Goodbye to "Tint Interference"

If you've got ceramic or metallic window tint (which is great for heat rejection but terrible for radio waves), you know the struggle. This antenna features a built-in 12V powered pre-amplifier that actively compensates for signal loss caused by window films, ensuring your radio gets a strong, clean signal.

3. Aerodynamic Design & Wind Noise Reduction

Nobody likes that annoying whistling sound at highway speeds.

• Aero Dynamic: Unlike cheap fins, this antenna is wind-tunnel tested to cut through the air smoothly, reducing drag and eliminating high-speed whistle.

• Static Discharge: It also helps dissipate static electricity build-up on the vehicle's surface, protecting sensitive electronics.

4. Direct Factory Replacement – Easy Install

Designed to fit most American, European, and Asian vehicles (Sedans, SUVs, Trucks).

• Universal Fit: Includes standard mounting hardware and shims to fit various factory holes.

• No Drilling Required: Uses a combination of a waterproof gasket, strong 3M Automotive tape, and a secure screw-down mechanism for a theft-proof and leak-proof fit.

• Paint Match Ready: Primed for painting or available in gloss black to match your trim.

Technical Specs

Compatibility & Fitment

Does it fit my car?
This antenna is designed as a universal replacement. It fits most vehicles that have either:

1. A standard hole mount (typically 18mm or M5 screw base).

2. A previous mast-style antenna (replaces the screw-in mast with a permanent fin).

Note: Please check your current antenna base type before ordering. Includes shims for fine-tuning fitment on curved roofs.

What's in the Box

• 1x Shark Fin Antenna Unit (Amplifier pre-installed inside)

• 1x Adjustable Mounting Base & Hardware Kit (Screws, Nuts, Washers)

• 1x High-Strength 3M Automotive Adhesive Pad (Pre-installed on base)

• 1x Wiring Harness (for 12V power connection)

• 1x Installation Manual (English)

💡 Pro Tip for Installation:

To get the best performance from the amplifier, the power wire needs to be connected to a 12V power source (like your radio's accessory wire or a fuse tap). This powers the signal booster. The ground is usually established through the mounting screws to the car roof.